Site Search
1
Unigy I Battery Specifications
Discharge rating in: Watts Amps
Nominal Voltage: 12 Volt
Alloy: Lead Calcium Tin
Element Post: Heavy-Duty
Post Seal: Epoxy-Sealed
Terminal: Inserted post #10-32 "No-Oxide Grease" is not required
Container / Cover: Flame retardant polypropylene - rated 28 LOI
Safety Vent: Low pressure self-sealing
Float voltage: 2.25 volts per cell ± 1% (Temperature compensated) (13.80 volts per 6-cell unit)
Charge Voltage: 2.30 volts per cell ± 1% (Temperature compensated) (13.80 volts per 6-cell unit)
Specific Gravity: 1.300
Inter-Battery Connectors: High-strength steel outer jacket is available.
Discharge Ratings Watts Per Cell (To various end voltages at 77°F (25°C))
Back to Top
Discharge Ratings in Amperes (To various end voltages at 77°F (25°C))
Back
Battery Care | Sealed Power | Cable TV | UPS Batteries | Panasonic | Photovoltaic | RV Marine | Communications | Golf Cart | Wheelchair | Rack Systems | Government Info | Our Locations | Ask the Doctor
Voltex® Batteries, Inc. 4895 Buford Hwy - Norcross, GA 30071 Phone 770-448-6021 - Fax 770-246-0565 Copyright© 2001 All rights reserved